Paʻa Cell Rubber Foam Insulation No nā Pūnaehana Lako Cryogenic
wehewehe
ʻO Kingflex Cryogenic Rubber Foam ka lōʻihi loa a kūpaʻa i ka lole a me ka waimaka.He kūpaʻa ia i ka makū, nā kemika, a me ka radiation UV, kūpono ia no ka hoʻohana ʻana i loko a me waho.
Ana maʻamau
|
ʻAha Kingflex | |||
| Iniha | mm | Nui (L*W) | ㎡/Rola |
| 3/4" | 20 | 10 × 1 | 10 |
| 1" | 25 | 8 × 1 | 8 |
Pepa ʻIkepili ʻenehana
| NuiWaiwai | Bmea ase | Kūlana | |
| Kingflex ULT | Kingflex LT | Hana Hoao | |
| ʻO ka hoʻoili wela | -100°C, 0.028 -165°C, 0.021 | 0°C, 0.033 -50°C, 0.028 | ASTM C177
|
| Māhele Mānoanoa | 60-80Kg/m3 | 40-60Kg/m3 | ASTM D1622 |
| Manaʻo i ka wela hana | -200°C a 125°C | -50°C a i 105°C |
|
| Paneka o na wahi kokoke | >95% | >95% | ASTM D2856 |
| Ke kumu hana ma'amau | NA | <1.96x10g(mmPa) | ASTM E 96 |
| Kumu kūʻē pulu μ | NA | >10000 | EN12086 EN13469 |
| ʻO ke koena hikiwawe wai | NA | 0.0039g/h.m2 (25mm mānoanoa) | ASTM E 96 |
| PH | ≥8.0 | ≥8.0 | ASTM C871 |
| Tensile Ikaika Mpa | -100°C, 0.30 -165°C, 0.25 | 0°C, 0.15 -50°C, 0.218 | ASTM D1623 |
| Comprssive Strength Mpa | -100°C, ≤0.3 | -40°C, ≤0.16 | ASTM D1621 |
ʻO nā pono nui o ka huahana
.ʻO ka insulation e mālama ana i kona maʻalahi ma nā haʻahaʻa haʻahaʻa loa a hiki i -200 ℃ a + 125 ℃.
.Hoʻemi i ka pilikia o ka ʻino ma lalo o ka insulation
.Pale i ka hopena mechanical a me ka haʻalulu.
.Haʻahaʻa thermal conductivity
.Haʻahaʻa aniani hoʻololi wela
.Hoʻokomo maʻalahi no nā ʻano paʻakikī.
Ko makou Hui
Hōʻikeʻike hui
Palapala
-
Kelepona
-
leka uila
-
Whatsapp